New Balance 8.0e Benutzerhandbuch

6

Lift up the Vertical Column Tube and insert into Base
Frame Assembly. When lifting the Vertical Column Tube,
be sure you don’t cut wires.

Insert the six M8 x 15mm Allen Bolts, M8 Spring Washers
and M8 Curved Washers, finger
tighten. Once all Bolts are 
inserted you must tighten with 
the long Allen Wrench provided.

Carefully lay the unit on its side. Remove the
orange Shipping Plugs by prying them out
with a Screwdriver. Put Rear Caps and Front
Rollers on the appropriate ends of the Base
Frame Assembly that are facing up. Aligning
the notches in the Base Frame Assembly with
the notches in the Rear Caps and Front 
Rollers, insert the two M6 x 20mm Phillips 
Screws and tighten with the 
Screwdriver provided.

Lay the Unit on the other side and repeat.
Stand unit back up to proceed.

example