NewAir Thermoelectric Wine Cooler AW-210ED Benutzerhandbuch

Troubleshooting 

To troubleshoot your wine cooler, follow the suggestions below to address the most common problems 
before seeking assistance from a service center: 
 

The wine cooler will not operate. 

•  The unit may be plugged in using a different voltage. 

Also, the circuit breaker may be tripped or there is a 
blown fuse. 

The wine cooler is not cold 
enough.   

•  Check the temperature control settings, as the external 

environment may require a higher setting. 

•  The door may be opened too frequently. 
•  The door is not closed completely. 
•  The door seal does not seal properly. 
•  The wine cooler does not have sufficient clearance. 

The light does not work.     

•  Contact the dealer or an authorized service center. 

The wine cooler vibrates while 
operating.   

•  Make sure the unit is leveled.         

The wine cooler produces a lot of 
noise.   

•  The unit may not be leveled.     
•  Check the fan. 

The door will not close properly. 

•  The unit is not leveled.     
•  The doors are reversed and not properly installed. 
•  The seal is weak. 
•  The shelves are out of position. 

The LED display does not work.     

•  There may be a problem with the main control board.   
•  There is a PCB problem. 
•  There is a problem with the plug.     

There is an LED display error.     

•  The display may be weak.     
•  The temperature point is off. 

The buttons do not function.     

•  The temperature control panel may be damaged.