Navman 4432 Benutzerhandbuch

Press MENU twice, to show the Setup menu, then select a particular option using the   or   cursor 
keys. (Section 2 Basic Operation, describes the basic use of keys.)

The  Setup menu and options are summarized below. The factory default settings are shown 
where applicable.

Each Setup menu option is explained in the following sections.

An internal simulator allows users to learn how to operate the fishfinder off the water. 

In Simulate mode the word Simulate flashes on the bottom of the display. The fishfinder 
generates data so that all the main displays 
appear to be operational. 

Use Setup > Simulate as follows:

1. Press 

MENU twice to show the Setup menu.

2. Highlight 

Simulate. 

3. Press 

ENT to select or de-select.

Press AUTO to select one of the three following operating modes:

• 

Cruise mode. Use this when on the move. The FISH 4432/4433 prominently displays the water 
depth and automatically adjusts Range and Gain so that the bottom trace is displayed. Depth is 
displayed in large digits.

• 

Fishing mode. Use this when fishing. 
The FISH 4432/4433 prominently displays fish, the bottom profile, wrecks, rocks and all the 
details that help to find fish. Gain and Range are optimized automatically, increasing the 
sensitivity and fishfinding ability.

• 

Manual mode. Use this to fine-tune the fishfinding ability of the FISH 4432/4433. Best results 
are often achieved in manual mode, but practice and experience are required to obtain the 
optimum settings for different conditions. Gain, gain threshold and pulse power can all be 
adjusted. Manual mode stores the most recent settings, so these do not have to be reset each 
time manual mode is selected. 

FISH 4432/4433 Installation and Operation Manual

9

NAVMAN