NEC EXPRESS 5800 Benutzerhandbuch
4-24 Installing the Operating System
Setup Flow
This section describes the flow of how to setup using Express Setup.
Disk Array Configuration *1
↓
Restart
↓
Creating Maintenance Partition
↓
Restart
↓
Installing Utilities
↓
Restart
↓
*2
Creating OS Partition
↓
Restart
↓
Formatting OS Partition
↓
Copying NEC Modules
↓
Copying Selected Application Modules
Read notes and restrictions.
Confirmed
Go back
Select the method of the installation.
Yes
Insert floppy disk.
Confirmed
Specify Setup Parameter File.
No
Detect
again
Use Existing
File
Select OS
Create New
File
Abort
Check Setup Parameter File
Requires to
detect again
normal
Select whether or not
to confirm/modify the
existing values
to confirm/modify the
existing values
Confirm/input the specification
Re-select
OK
abnormal
No
Yes
Install Graphic Accelerator Driver
Automatic Installation
↓
Log on Automatically
: Process that continues automatically
: Process requires input or selection
After the reboot, the
installation is completed.
*3
Insert Update Media
*4
Insert Windows NT CD-ROM
Agree to Software License Agreement
Copy Window NT CD-ROM
Insert Service Pack CD-ROM
*1 This step occurs only when Disk Array Controller Board is connected and a RAID configuration is specified.
*2 If the operating system to be installed is [Others] or [NetWare], the process is completed here.
*3 This step occurs only when optional graphic accelerator board is connected.
*4 This step occurs only when you specify to apply update media during the installation.
*2 If the operating system to be installed is [Others] or [NetWare], the process is completed here.
*3 This step occurs only when optional graphic accelerator board is connected.
*4 This step occurs only when you specify to apply update media during the installation.