National Instruments NI-488.2 Benutzerhandbuch

Seite von 134
Glossary
G-4
ni.com
hex
Hexadecimal—A number represented in base 16. For example, 
decimal 16 is hex 10.
high-level function
See 
HS488
A high-speed data transfer protocol for IEEE 488. This protocol increases 
performance for GPIB reads and writes up to 8 Mbytes/s, depending on 
your system.
Hz
Hertz.
I
I/O 
Input/output—In this manual, it is the transmission of commands or 
messages between the system via the GPIB board and other devices 
on the GPIB.
I/O address
The address of the GPIB board from the point of view of the CPU, as 
opposed to the GPIB address of the GPIB board. Also called port address 
or board address.
ibcnt
ibcntl
After each NI-488.2 I/O call, these global variables contain the actual 
number of bytes transmitted. On systems with a 16-bit integer, such 
as MS-DOS, 
ibcnt
 is a 16-bit integer, and 
ibcntl
 is a 32-bit integer. 
For cross-platform compatibility, use 
ibcntl
.
iberr
A global variable that contains the specific error code associated with 
a function call that failed.
ibsta
At the end of each function call, this global variable (status word) contains 
status information.
IEEE
Institute of Electrical and Electronic Engineers.
interface message
A broadcast message sent from the Controller to all devices and used 
to manage the GPIB. 
ISA
Industry Standard Architecture.
ist
An Individual Status bit of the status byte used in the Parallel Poll 
Configure function.