National Instruments Car Stereo System 320571-01 Benutzerhandbuch
Appendix A
Error Codes
© National Instruments Corporation
A-3
NI-DSP SRM for LabVIEW for Windows
Table A-1. NI-DSP Analysis Library Error Codes (Continued)
Error
Number
Error Name
Description
-21308
TransferSizeErr
The size of requested block transfer does not have enough space
allocated for it on the board.
allocated for it on the board.
-21309
NotDSPHandle
The DSP Handle specified is not valid for this board:
it has either been freed or never allocated.
it has either been freed or never allocated.
-21310
HandleSlotErr
The DSP Handle used does not belong to the same board on
which the function request is made.
which the function request is made.
-21311
HandleAllocErr
Failed to allocate a handle in the interface code.
-21312
TimeOutErr
The Kernel did not respond or finish function execution in the
selected timeout.
selected timeout.
-21313
COFF_FilePathErr
Could not find the DSP Library file in the directory set by the
DAQCONF
utility.
-21314
CoffHdrErr
The file you are attempting to load to the DSP board is not
created using the WE DSP32C tools (not an acceptable
COFF file).
created using the WE DSP32C tools (not an acceptable
COFF file).
-21315
CoffSectErr
Found an unimplemented section flag in the COFF file.
-21317
AddrSpaceErr
The COFF file you are trying to load is linked with a memory
map that exceeds the maximum memory space allowed by the
WE DSP32C chip (2
map that exceeds the maximum memory space allowed by the
WE DSP32C chip (2
24
).
-21318
NoBrdRespToTransfer
The DSP board on which you are trying to load the COFF file is
not responding to the transfer of the file. Check if there is a
board in the slot desired and verify with the
not responding to the transfer of the file. Check if there is a
board in the slot desired and verify with the
DAQCONF
utility.
-21324
FNC_ERR
The function ID specified does not correspond to a function that
is part of the DSP Library currently running on the board.
is part of the DSP Library currently running on the board.
-21325
GROUP_ERR
The function ID specified does not belong to any group that is
part of the DSP Library currently running on the board.
part of the DSP Library currently running on the board.
-21331
NotFindFunctionInDLL
An error occurs when loading
dsp.dll
library in CIN.
-21332
LoadDLLLibErr
An error occurs when loading a function in
dsp.dll
in CIN.
-21333
ErrInGetFunctionHandle
An error occurs when calling the
GetIndirectFunctionHandle
function in CIN.
-21334
InvalidBytesSelect
bytes/element selector can only select between 4 bytes(0) and 2
bytes(1).
bytes(1).
-21336
AllocArrayFailed
Failed to allocate a LabVIEW array.
-21337
InvalidArrayType
The array type can only be 32-bit floating point data(0), 16-bit
long integer data(1) or 32-bit short integer data(2).
long integer data(1) or 32-bit short integer data(2).
-21338
PathnameTooLong
The path name should be less than 256 characters.
-21339
InvalidCopyType
The entire/partial copy selector can only select between entire
copy (0) and partial copy(1).
copy (0) and partial copy(1).
-21340
CopyNumGTZero
The number of data to copy should be greater than zero.
-21341
OffsetGEZero
The offset should be greater than or equal to zero.
-21342
IndexSizeGTZero
The size of the New DSP Handle Cluster should be greater than
zero.
zero.
(continues)