KVH Industries TracPhone V7 Benutzerhandbuch

29

e. Using a utility knife, carefully remove any 

residual plastic from the center conductor, if 

f. Insert the end of the cable into the #2 end of 

the ST-400EZ stripping tool (see Figure 54). 

Then rotate the tool clockwise around the 

cable until the tool turns easily. This removes 

the cable jacket from the end of the cable, 

exposing the braid and dielectric (see 

g. Using the DBT-02 tool, deburr and chamfer 

the center conductor (see Figure 56). Avoid 

nicking the aluminum tape covering the 

dielectric.

Figure 53:  Removing Plastic Residue

Figure 54:  Stripping the Cable Jacket

Figure 55:  Cable Stripped, Exposing Dielectric

Figure 56:  Deburring the Center Conductor

Continued 

Terminating LMR-400-75 Cable

B