Kodak DIRECTVIEW DV3MC Benutzerhandbuch

This unit has loaded a function compliant with DDC-2B, a VESA standard.

This function reads into the set data written in the color LCD monitor internal device in advance 

on startup of Windows

 

95/98/Me/2000 or Windows

 

XP and sets the detailed information of the 

color LCD monitor in the system file in order to achieve Plug&Play.

Data reading from the color LCD monitor is done through a video signal cable, which needs to 

be connected when Windows

 

95/98/Me/2000 or Windows

 

XP is on.

*1

DDC(Display Data channel) 

This is the function that truns off the screen by detecting input signal change to reduce consumption 

current for power saving.

Refer to the user's manuals of your computer and display drivers for power management

 

 settings and 

time-settings for mode change.

When using DVI digital input signal, under the process of closing connected system or changing 

resolution, noise will be seen. This is not a color LCD monitor failure. Pulling out or plugging into the DVI 

cable during DVI digital input use may lead to failure of the display driver on the system. Pull out or plug 

into the DVI cable when the system is off.

 

*1

DV3MC does not have an OSD (adjustment button). If you need to make adjustments on luminance and 

shades of color, connect DV3MC and your computer with the attached serial communication cable 

(RS-232C) and install “DirectColorCal.”

* For details, refer to the user’s manual in the DirectColorCal CD-ROM.

If you wish to make adjustments on color temperature, gamma, and luminance, please purchase an 

optional calibration kit.