Key Digital FATBOY KD-MSW4X2 Benutzerhandbuch

Seite von 20
KD-MSW4x2 Operating Instructions
Page 2
KD-MSW4x2 Operating Instructions
Page 
Front and Rear Panels
Typical Input/Output Port
 
Quick Installation
Connect up to four source devices to the Input Ports 1 - 4 on the rear panel  
of the KD-MSW4x2 unit. 
Connect two displays to the Output Ports 1 and 2 on the rear panel  
of the KD-MSW4x2 unit.
Input/Output Ports and Formats
The output format = the format of the selected input source
Each Port supports:
YPbPr component video, analog stereo left and right audio, and digital PCM audio
RGBHV video and digital PCM audio
RGB video with sync on the green channel, analog stereo left and right audio, and digital PCM 
audio
S-Video and composite video (CVBS), with adapters
Each connector can accommodate various signals, on a shared basis:
Red Connector:  Pr/R
Pr label is for component video
R label is for the red channel for RGBHV video
Green Connector:  Y/G
Y label is for component video
G label is for the green channel for RGBHV video
Blue Connector:  Pb/B
Pb label is for component video
B label is for the blue channel for RGBHV video
White Connector:  L/H
L label is for the left analog stereo audio channel
H label is for the horizontal sync for RGBHV video
Red Connector:  R/V (Right analog stereo audio, or vertical sync for RGBHV video)
R label is for the right analog stereo audio channel
»
»
»
»
»
»
»
»
»
CAUTION: Do not connect the external supply (provided) to 
the back of the KD-MSW4x2 unit until ALL of your video and 
audio connections are completed.
Video
Audio
Component Video Applications
Inputs and Outputs
RGBHV Video Applications
Inputs and Outputs
Pr
Y
Pb
Left (L)
Right (R) Digital
PCM
R
G
B
H
V
Digital
PCM
Component Video
RGBHV Video
Analog
Stereo
Audio
Digital
Audio
Digital
Audio
If video sync is
on Green (G), then
Analog Stereo Audio
is also supported
here in place of H&V 
For proper operation of the high quality electrical circuits in the KD-MSW4x2 unit, do 
NOT "daisy chain" inputs:
Each input of the KD-MSW4x2 has its own 75 
Ω termination
Do NOT feel a source to multiple KD-MSW4x2 inputs without proper 
distribution equipment
Inputs
Outputs
Power Supply
Wired IR
IR Extender
RS-232
1
2
1
2
3
4
Pushbutton to Select Input
Input Selected LEDs
IR Remote Sensor