Jensen Heavy Duty JHDATVK Benutzerhandbuch

Attach the Speaker Bracket to the Mounting Plate per the instructions included with the Speakers.  Attach the speaker to the Speaker Bracket also per the 

instructions included with the Speakers.

Attach the Antenna to the mounting plate per the instructions included with the JAN139 Antenna.

1. Remove the 2 Clamp Bolts, using the supplied 5/32” hex key, separate the clamp and place the bottom half under the rack where 

    you want to locate the mount on the rack.  

2. Place the top half of the clamp on the rack and install the Clamp Bolts.  Tighten until you cannot move the clamp assembly.

Same as JXHDARMT above except skip step #2, Mounting the JAN139 Antenna.

Complete the Speaker and Antenna installation per the included instructions using the wire loom and cable ties to organize and tie up any 

loose wiring to keep everything neat and orderly.

37200042   REV-A

JHDATVK

Installation Instructions

Page 2-2