Jameco Electronics 527822 Benutzerhandbuch

 

1.  Turn off your printer. Plug in the cable to connect USB 2.0 DOCK parallel port 

and printer. Turn on the printer afterwards. 

2.  Turn on your computer and plug in the USB cable to connect the USB 2.0 USB 

and the USB port of PC. 

3.  If you have installed a printer device before, click Start, Settings, Printers. 

Right-click the default installed printer and click on Properties. The Properties 
dialog box of the installed printer will appear on your screen. 

4. Click the Ports tab and change the printer port to USB001 (Virtual printer port 

to USB).  

 

Figure 17 

5.  If you do not have a printer installed yet, click on Start, Settings, Printers, Add 

Printer. The Add Printer Wizard will start and assist you in installing a new 
printer device. Select the printer manufacturer and model name from the list 
provided by the wizard or use the printer driver diskette supplied by your printer.   

6.  When prompted which port the printer will use, click on USB001 (Virtual 

printer port to USB). 

 

Figure 18 

 

- 24 -