Jameco Electronics 527822 Benutzerhandbuch

Introduction 

Thank you for ordering the USB 2.0 DOCK.    The USB 2.0 DOCK is an intelligent 
expansion module, which connects to a PC or notebook via Universal Serial Bus 
(USB) port, providing one high-speed RS-232 serial port, one printer port, one PS/2 
keyboard & mouse and 4 downstream USB ports.    The USB 2.0 DOCK features 
easy connectivity for traditional serial devices, keyboards, mice and other USB 
devices and provides up to 480Mbps USB2.0 High Speed capability. 
By simply plugging in a USB 2.0 DOCK, you will: 

 Add one high-speed serial port, one printer port, one PS/2 keyboard & mouse and 

4 downstream USB ports to your PC or notebook in seconds. 

 Three USB High Speed downstream ports and one USB Full/Low Speed 

downstream Port. 

 Improve the inconvenience of configuring old PC solutions like card extension 

solutions, which require adjusting IRQ or jumper settings and the incompatibility 
of various brands of docking solutions or bus repeaters. 

 Avoid the hassle of removing your PC case, or rebooting the operating system 

during installation. 

 

System Requirements 

 A PC with a minimum of a 75MHz Pentium, or equivalent 
 A minimum of 16M bytes of RAM. 
 One available USB type A downstream port. (UHCI, OHCI, or EHCI) 
 Windows 98 or later. 

 

 

Package Contents 

The product you purchased should contain the equipment and accessories shown as 
follows: 

 USB 2.0 DOCK

 

 One 6’ USB AB type cable

 

 One 2A switching power adapter (optional)

 

 One USB 2.0 DOCK driver and User’s manual CD

 

 

- 3 -