Ninja BL770 Benutzerhandbuch

 IMPORTANT: Make sure that the motor 

base is plugged in for use.

1  Place the motor base on a clean, dry, level 

surface such as a counter or table top.

2  Add ingredients to the single serve cup. 
3  Place the single serve blade onto the cup and 

screw it tightly until you have a good seal. 

(Fig. 1)

4  Turn the single serve cup upside down and 

place it onto the motor base, aligning the 

tabs on the cup with the motor base. Turn the 

single serve cup clockwise. (Fig. 2) Turn the 

power button on, the single serve button will 

illuminate.

5  Press down on the Single Serve button in 

short intervals to activate. (Fig. 3)

For best results, use short “PULSES”... Practice makes perfect!!

6  Once you have reached your desired 

consistency, turn the power button off. Turn 

the single serve cup counter clockwise and 

pull straight up to remove. (Fig. 4) (Fig. 5)  

NOTE: Do not overfill! To avoid spilling, do 

not add ingredients past the “Max” fill line.

7  Turn the cup upright and remove the single 

serve blade by twisting the blade assembly 

clockwise.

8  Place the To-Go drinking lid onto the single 

serve drink cup, twist to seal and enjoy!

9  Make sure that the motor base is unplugged 

when not in use.

NOTE: To order additional Single Serve Cups, please 
visit our website: www.ninjakitchen.com or feel free 
to contact customer service: 1-877-646-5288.

  WARNING: Never leave the appliance unattended while in use.

BL770_series_30_IB_ENG_121206_6.indd   10

12-12-06   11:18 AM