Musical Fidelity V-PSUII Merkblatt

V-PSU

Power Supply Unit

Instructions

Introduction

Thank you for purchasing the V-PSU

power

supply unit. We sincerely hope that it will
bring you many years of outstanding
listening pleasure.

Installation Precautions

Your new V-PSU

is designed and built to

provide trouble-free performance, but as with
all electronic devices, it is necessary to
observe a few precautions:
Do not use the V-PSU

near water. The unit

must not be exposed to dripping or splashing
and no objects filled with liquids, such as
vases, must be placed on the unit.
Keep the V-PSU

away from heat such as

radiators. No naked flame sources, such as
lighted candles, should be placed on the
unit.

This product has been tested to ensure that
its operation is not adversely affected by
normal background levels of Radio
Frequency Interference (R.F.I.), and that it
does not itself generate excessive amounts
of interference. However, if a problem
persists, please contact your Musical Fidelity
agent.
Never open the case of the V-PSU

yourself, as this will invalidate the guarantee.
Place all connecting cables where they are
not likely to be walked on or trapped by

items placed on them.
The V-PSU

will operate in accordance with

its specifications within the following
environmental range:

Temperature 5 to 45 degrees Celsius
Humidity 10 to 90% non condensing

There are no user adjustments inside.
Please refer all service work to an
authorised Musical Fidelity agent.

Front and back connections

Power output sockets

and indicator LEDs

Connections

All connections must be made before the mains adaptor is
plugged in, and before any amplifier connected is switched
on. Always switch off the V-PSU

(

and connected amplifiers

etc) before connecting/disconnecting power, or changing
leads.
Power Inputs
Using figure-8 moulded mains lead (supplied), connect the

V-PSU

to a mains socket.

Power Outputs
Using 1.3mm DC plug to plug lead(s) (supplied), connect
the V-PSU

12VDC OUTPUTS to the V-series units as

required.
Use
Connect up the V-series components audio inputs and
outputs as required.

Switch on the V-PSU

using the rocker switch next to the

mains input socket.

The three individual output LEDs should light indicating
presence of power at the respective output.
Switch on attached components (amplifiers etc).

Turn the volume on amplifier to normal listening levels, sit
back and enjoy the music.
These products have been designed so that it may be left
on indefinitely, but please note that the V-PSU

may

become warm to the touch - this is normal.

Note: The V-PSU

can also be used to power older V-series

components.

Power switch

Power input socket