MRV Communications EM316SW-XY Benutzerhandbuch

 

 

 

 

 

 

 

 

®

 EM316SW-XY 

 
 PN 1288003-001, Rev D2 

59

 

 
 

 
Each operational mode is represented below with the “show” command. 
 
 

 

 
In this mode, the module acts as a pair of repeaters. 
 

•  Fiber Optic Repeater between the two 100Base-FX SFP based interfaces 

•  Copper Repeater between the two 10/100 Base-TX interfaces 

 
 

 

 
 
In Dual Repeater mode, copper ports P1 and P4 and paired and SFP ports P2 and P3 are 
paired. Only the copper port pair is shown in this example. 
 
 

 

 

fiberdriver(config)# port 1.3.1 
fiberdriver(port/1.3.1)# no lin 
 fdrd[58]|TRAP|   warn|17:11:43 1978 Port 1.3.1 LIN Off 
 fdrd[58]|TRAP|   warn|17:11:44 1978 Port 1.3.4 LIN Off 
 
fiberdriver(port/1.3.4)# lin 
 fdrd[58]|TRAP|   warn|17:14:37 1978 Port 1.3.1 LIN On 
 fdrd[58]|TRAP|   warn|17:14:38 1978 Port 1.3.4 LIN On 
 
fiberdriver(port/1.3.4)# 

fiberdriver# show 1.3 
             Slot: 1.3 
            Model: EM316SW-XY 
             Name: EM316SW-XY at 1.3 
Hardware Revision: 1, FPGA 0x68 
 
Sw Configurable: yes  Operation Type: repeater 
 
Number Of Ports: 4 
Port   Enable  Link       LIN      Speed     DDiags  WL(nm)  Name 
=====  ======  =========  =======  ========  ======  ======  ============== 
1.3.1  enable  no Signal  disable  10 Mbps   N/A     N/A     RJ-45 at 1.3.1 
1.3.2  enable  no Signal  disable  100 Mbps  Ok      1590    SFP at 1.3.2 
1.3.3  enable  no Signal  disable  100 Mbps  Ok      1590    SFP at 1.3.3 
1.3.4  enable  no Signal  disable  10 Mbps   N/A     N/A     RJ-45 at 1.3.4 
 
fiberdriver#