Micro Innovations M000174-19 Benutzerhandbuch

6  

M000174-19 

The operating system is implemented in English on all MICRO PANEL devices with Windows CE

®.  

 

Note: 
This documentation applies to MICRO PANEL devices which have the Windows

® CE 3.0 operating 

system from image version 2.20.0 and Windows

® CE 5.0 from image version 2.22.0. 

With all MICRO PANEL devices from image version 2.00 (see also 

), the operating 

system is started from a PCMCIA or CompactFlash card. The operating system is stored in the OS 
directory on the Flash card. The device only contains the bootloader which searches for the operating 
system on the Flash card when the device is started, and then launches it. The following screen at 
least is shown during startup: 
 

 

 

The display shows different information such as the network settings, the serial number and the 
number of license points. If the Flash card does not contain an operating system, the screen shows 
the following: 

 

If this display appears on the screen, this means that either there is no Flash card in the device, the 
card is not correctly formatted or does not contain a valid operating system. The valid operating 
system depends on the device concerned! 

Note: 
The display may vary according to the device type! 

 

Important: 
The PC must contain a suitable drive for writing the PCMCIA or Compact Flash card for the first time! 

 

After Windows CE is launched, the following functions are run if the 

 is not 

pressed: 
 

1.  The registry entries are transferred once the AUTOEXEC.REG file is found in the root directory of 

the Flash card. See also chapter 

. 

2.  The bootloader also looks for the AUTOEXEC.BAT file in the root directory. This file is run if it is 

present. See also chapter