McIntosh MDLP1 Benutzerhandbuch

5

1. The Main AC Power going to the MDLP1 and any other 

McIntosh Component(s) should not be applied until all 

the system components are connected together. Failure 

to do so could result in malfunctioning of some or all of 

the system’s normal operations. When the MDLP1 and 

other McIntosh Components are in their Standby Power 

Off Mode, the Microprocessor’s Circuitry inside each 

component is active and communication is occurring 

between them.

2. For additional connection information, refer to the 

owner’s manual(s) for any component(s) connected to 

the MDLP1 Video Projector.

3. To protect the Projector Lens from possible damage it is 

advisable to keep the Lens Cover on the Projector dur-

ing the following:

a. Transporting of the projector.

b. Installation and connection of the projector.

c. During the installation of other items and/or 

remodeling of the room where the projector is 

located.

4. The Projector Lens is a precision optical device with 

special coatings just like you would find on Profes-

sional Cameras. In the event the Lens requires cleaning 

to remove airborne particles such as dust and dirt from 

the Lens, use a safe cleaning product such as a clean 

and dry 3M

TM

 Scotch-Brite

®

 Microfiber Lens Cleaning 

Cloth. At no time should ordinary household cleaning 

products be used to clean the Lens, as damage will oc-

cur.

5. A McIntosh Power Controller may be added to the 

MDLP1 to provide AC Power Switching to components 

without Power Control Connections, such as a motor-

ized projection screen. See your McIntosh Dealer for 

additional information.

6. The IR Input, with 1/8 inch mini phone jack, is config-

ured for non-McIntosh IR sensors such as a Xantech 

Model 291-80 or equivalent. To avoid possible interac-

tion, the MDLP1 Sensors may be disabled by activat-

ing the On-Screen Menu, then select from the menu 

Config→Remote Control→Wired. Then deactivate the 

On-Screen Menu. Refer to the “How to Operate the 

MDLP1” starting on page 23.

7. The On-Screen Menu System for adjustment of settings 

is interactive and Video Input type based, make sure to 

select the desired Video Input and Picture Mode before 

attempting to change the settings.

8. The MDLP1 has two Component Video Inputs for 

analog video signals and two HDMI Inputs for Digital 

video signals. The On-Screen Menu System has selec-

tions for Composite Video, S-Video and RGB Inputs. 

Those inputs have no functionality when selected on the 

MDLP1.

9. When the symbol illustrated here is located on the prod-

uct or on its packaging indicates that this product must 

not be disposed of with your other house-

hold waste. Instead, it is your responsibil-

ity to dispose of your waste equipment by 

handing it over to a designated collection 

point for the recycling of waste electrical 

and electronic equipment. The separate 

collection and recycling of your waste 

equipment at the time of disposal will help to conserve 

natural resources and ensure that it is recycled in a 

manner that protects human health and the environ-

ment. For more information about where you can drop 

off your waste equipment for recycling, please contact 

your local city office, your household waste disposal 

service or the McIntosh Dealer where you purchased 

the product.

3M

TM

 is a trademark of the 3M Company and

  

Scotch-Brite

® 

is a registered trademark of the 3M Company.