Marantz PMD690 Benutzerhandbuch

The following illustrations show you how to connect

digital audio components.

To output digital audio signals to another audio
component
Connect the DIGITAL OUT (RCA) jack on the PMD690 to

the digital input jack on the destination component.  Turn

the output on by placing the switch (next to the output

jack) in the ON position.

Notes
• Digital audio is only output during normal playback and EDL

playback.  Digital audio is not output during recording even if
the output is turned on.

• When the digital output is not used, make sure to keep the

DIGITAL OUT switch OFF to save battery life.

• Make sure the destination component accepts the SPDIF (or

IEC-958-II) type digital audio format.

• Make sure the destination component accepts a sampling

frequency of 48kHz or contains a digital sample rate converter.

Connect headphones to the HEADPHONE output as

indicated below.  Both recording and playback can be

monitored through connected headphones.

Notes
• Use the HP/SPK VOLUME knob to control the volume of the

headphone.

• The sound from the internal speaker is muted automatically

when headphones are connected.

Recording

Pause recording

Resume recording

Playback

Resume playback

Pause playback

Available Functions
The remote Pauses or Un-Pauses the unit during playback
and recording.

REMOTE

2.5 mm Jack