LXE HX2 E-EQ-HX2RG-B Benutzerhandbuch
Start Menu Program Options
85
E-EQ-HX2RG-B
HX2 Reference Guide
Communication
Access:
| Programs | Communication
Note: Some communication menu options require an external modem connection to the HX2.
Modems are not available from LXE nor supported by LXE.
ActiveSync
Once a relationship (partnership) has been established between the HX2 and a desktop computer,
ActiveSync can synchronize using the network link or USB port on the HX2.
ActiveSync can synchronize using the network link or USB port on the HX2.
Refer to ActiveSync / Get Connected Process later in this chapter for more information and
instruction.
instruction.
To initiate synchronization (or network link) from the mobile device that already has a
relationship with the desktop computer, tap
relationship with the desktop computer, tap
| Programs | Communication | ActiveSync to
begin the process.
For more information about using ActiveSync on your desktop computer, open ActiveSync, then
open ActiveSync Help.
open ActiveSync Help.
Connect
Connect is used to initiate a hardwired connection to a host and to create the initial partnership for
synchronizing wirelessly.
synchronizing wirelessly.
The default connect setup is USB direct connect.
After a Connect setup is selected,
| Programs | Communication | Connect will start to
connect to a host.
See Also: Cold Boot and Loss of Host Re-connection
Remote Display
Access:
| Programs | Communication | Remote Display
Equipment Required: HX2 USB ActiveSync Cable. Desktop/laptop computer.
Remote Display is used with ActiveSync to display the contents of the HX2 file structure on a
desktop/laptop computer screen. Once connected, the desktop keyboard and mouse can be used to
manipulate files, data or settings on the HX2.
desktop/laptop computer screen. Once connected, the desktop keyboard and mouse can be used to
manipulate files, data or settings on the HX2.
Before using Remote Display, refer to the following processes outlined in ActiveSync / Get
Connected Process for information and instruction:
Connected Process for information and instruction:
• “Initial Install | USB Connection”
• “Initial Install | Connect – Initial Install Process”
• “Explore”
• “Disconnect”
• “Initial Install | Connect – Initial Install Process”
• “Explore”
• “Disconnect”
Note: Initial ActiveSync connection requires a USB connection, subsequent connections can be
either USB or RS-232 serial. When the HX2 enters Suspend, an established ActiveSync
connection is maintained. Refer to “ActiveSync / Get Connected Process” for full details.
connection is maintained. Refer to “ActiveSync / Get Connected Process” for full details.
1. Run ActiveSync on the desktop/laptop.