LXE HX2 E-EQ-HX2RG-B Benutzerhandbuch
Wavelink Avalanche Enabler Configuration
155
E-EQ-HX2RG-B
HX2 Reference Guide
Adapters Tab
Note: LXE recommends the user review the network settings configuration utilities and the
default values in Chapter 5 – Wireless Network Configuration before setting All Adapters
to Enable in the Adapters applet.
to Enable in the Adapters applet.
Figure 3-55 Avalanche Enabler Adapters Options – Network
Manage Network
Setting
Setting
When enabled, the Enabler will control the network settings. This
parameter cannot be configured from the Avalanche Mobility Center
Console and is enabled by default.
parameter cannot be configured from the Avalanche Mobility Center
Console and is enabled by default.
Manage Wireless
Settings
Settings
When enabled, the Enabler will control the wireless settings. This
parameter cannot be configured from the Avalanche Management
Console and is disabled by default. This parameter setting does not
apply to Summit Clients only.
parameter cannot be configured from the Avalanche Management
Console and is disabled by default. This parameter setting does not
apply to Summit Clients only.
Current Adapter
Lists all network adapters currently installed on the mobile device.
Primary Adapter
Indicates if the Enabler is to attempt to configure the primary adapter
(active only if there are multiple network adapters).
(active only if there are multiple network adapters).
Icon on taskbar
Places the Avalanche icon in the Avalanche taskbar that may,
optionally, override the standard Windows taskbar.
optionally, override the standard Windows taskbar.