LXE HX2 E-EQ-HX2RG-B Benutzerhandbuch

Getting Started

 

9

 

E-EQ-HX2RG-B 

 

HX2 Reference Guide 

The hip flip may be pre-assembled by LXE. 

•  Unpack the Hip Flip. Slide the belt through the loops on the 

Hip Flip. Do not put the hip flip on yet. 

•  Slide the battery into the battery sleeve on the hip flip.  
•  Snap all tethered devices to the connectors at the back of the 

HX2. See Connecting the Battery and Ring Scanner and 
Connecting the Audio Cable and a Headset. 

•  Snap the HX2 into the hip flip mounting bracket.  See 

Mounting Bracket Clips. 

•  Attach the battery cable to the battery. 
•  Put the hip flip on.  
•  Slip the ring scanner (if included) over one of your fingers, 

making sure your thumb or trigger finger can easily reach the 
scan button. See Ring Scanner Strap. 

•  Adjust the HX2 hip assembly for comfort. Occasionally check 

all connectors for stability. 

The wearable computer is ready for use. See Getting Started and Connecting the Battery and Ring 
Scanner for more detailed instruction. 

The ring scanner finger loop is located under the ring scanner.  

Pull gently on the end of the finger loop strap to separate the hook and loop fabric.  

Slide your finger into the opened loop under the ring scanner.  

Grasp the end of the finger loop strap and loosen, then tighten, the finger strap until the ring 
scanner is comfortably snug and the scan aperture is secured in the desired location. 

The ring scanner has a built-in quick disconnect designed for occasional safety hazards. It is not 
intended for frequent, normal removal of the ring scanner from the hand.