LXE HX2 E-EQ-HX2RG-B Benutzerhandbuch
234 Multi-Application
Configuration
HX2 Reference Guide
E-EQ-HX2RG-B
Launch Button
When clicked, displays the launch options panel for the selected Filename (see the Administration
panel) as shown below:
panel) as shown below:
Figure 6-5 Application Launch Options
Auto At Boot
Default is Enabled. Auto At Boot, when enabled, automatically launches (subject to the specified
Delay in seconds) the application after the unit is rebooted. If a Delay in seconds is specified,
AppLock waits for the specified period of time to expire before launching the application. The
Delay default value is 10 seconds; valid values are between 0 “no delay” and a maximum of 999
seconds.
Delay in seconds) the application after the unit is rebooted. If a Delay in seconds is specified,
AppLock waits for the specified period of time to expire before launching the application. The
Delay default value is 10 seconds; valid values are between 0 “no delay” and a maximum of 999
seconds.
Auto At Boot Retries is the number of times the application launch will be retried if a failure
occurs when the application is automatically launched at bootup. Valid values are between 0 (no
tries) and 99 tries or -1 for infinite. Infinite tries ends when the application successfully launches.
The default is 0 retries.
occurs when the application is automatically launched at bootup. Valid values are between 0 (no
tries) and 99 tries or -1 for infinite. Infinite tries ends when the application successfully launches.
The default is 0 retries.
Auto At Boot Delay timer is the time that AppLock waits prior to the initial launch of the selected
application when it is automatically launched at bootup. Delay default is 10 seconds. Valid values
are between 0 seconds (no delay) and 999 seconds.
application when it is automatically launched at bootup. Delay default is 10 seconds. Valid values
are between 0 seconds (no delay) and 999 seconds.
The Auto At Boot delay is associated for each application; it will be either a value specified by the
Administrator or it will be the delay default value. At startup, when a delay has been assigned for
each application, AppLock waits for the delay associated with the first application to expire before
launching the first application then AppLock waits for the delay associated with the second
application to expire before launching the second application. AppLock continues in this manner
until all applications are launched.
Administrator or it will be the delay default value. At startup, when a delay has been assigned for
each application, AppLock waits for the delay associated with the first application to expire before
launching the first application then AppLock waits for the delay associated with the second
application to expire before launching the second application. AppLock continues in this manner
until all applications are launched.
Note: A “Global Delay” can be accomplished by setting a timed delay for the first application
to be launched (by lowest Order number) and no delay (0 seconds) for all other
applications.
applications.
Note: Launch order is determined by the Order specified in the Application tab. The Order
value does not have to be sequential.