LXE HX2 E-EQ-HX2RG-B Benutzerhandbuch

Bluetooth

 

37

 

E-EQ-HX2RG-B 

 

HX2 Reference Guide 

 

Yellow LED blinks at 2 Hz 

Linking in progress 

Off 

Disconnected or unlinked 

Yellow LED blinks at 50 Hz 

Bluetooth transmission in progress 

Yellow LED blinks at the same rate 
as the paging beep (1 Hz) 

Paging 

Green LED blinks once a second 

Disabled indication 

 

Upon startup, if the mobile Bluetooth scanner sounds a long tone, this means the scanner has not 
passed its automatic Selftest and has entered isolation mode. If the scanner is reset, the sequence is 
repeated. Contact LXE Support for assistance. 

The Bluetooth managed device should be as close as possible, in direct line of sight, with the HX2 
during the pairing process. 

1.  Open the LXEZ Pairing panel [Start | Settings | Control Panel | Bluetooth].  
2.  Tap Discover. Locate the Bluetooth printer in the discovery panel.  
3.  Tap and hold the stylus on the Bluetooth printer until the right-mouse-click menu appears. 
4.  Select Pair as Printer to pair the HX2 with the Bluetooth managed printer.  

The devices are paired. The Bluetooth managed printer may respond with a series of beeps or 
LED flashes.  

Please refer to the Bluetooth managed printer manufacturer’s User Guide; it may be available on 
the manufacturer’s web site. Please contact your LXE representative for Bluetooth product 
assistance.