LXE HX2 E-EQ-HX2RG-B Benutzerhandbuch
40
Data Entry
HX2 Reference Guide
E-EQ-HX2RG-B
Scan Status LED
Figure 1-34 Scan Status LED
The Scan Status LED (oval shaped LED on the top of the ring scanner) turns red when the laser
beam is on. Following a barcode scan and read the Scan Status LED turns green for two seconds
and the HX2 may beep, indicating a successful scan. If the scan was unsuccessful, the Scan Status
LED turns off and a different beep sequence may be heard.
beam is on. Following a barcode scan and read the Scan Status LED turns green for two seconds
and the HX2 may beep, indicating a successful scan. If the scan was unsuccessful, the Scan Status
LED turns off and a different beep sequence may be heard.
The ring scanner engine and Scan Status LED automatically turn off after a successful or
unsuccessful read. The ring scanner is ready to scan again after the Scan button is released, or
after the Scan Status LED turns off following a successful scan.
unsuccessful read. The ring scanner is ready to scan again after the Scan button is released, or
after the Scan Status LED turns off following a successful scan.
Voice Data
Data is entered into the HX2 by speaking into the headset’s microphone (or the internal
microphone located below the Up Arrow) when prompted.
microphone located below the Up Arrow) when prompted.