LXE HX2 E-EQ-HX2RG-B Benutzerhandbuch

46 

Setting Timers

 

HX2 Reference Guide 

 

E-EQ-HX2RG-B 

Select 

 | Settings | Control Panel | Display | Backlight tab. Change the parameter values and 

tap OK to save the changes. 

 

The first option affects the display when the HX2 is running on battery power only. The second 
option affects the display when the HX2 is running on external power (e.g. docked in a powered 
cradle).  

The default value for the battery power timer is 3 seconds.  

The default value for the external power timer is 2 minutes. The display backlight will remain 
on all the time when both checkboxes are blank.  

The display backlight timer dims the backlight at the end of the specified time.  

When the Keypad Backlight is On, it responds to the settings of the Display Backlight Timer. See 
next segment titled Turning the Keypad Backlight On or Off. 

See Chapter 3 – System Configuration for more information. 

The display brightness is increased or decreased one step each time the adjust brightness key 
sequence is pressed.  

To adjust display brightness: 

•  Alpha Mode 3 Tap keypad – Open the Keypad Control Panel | Keymap tab and map a key 

to Brightness Up and Brightness Down. Tap OK. Tap the mapped keys to increase or 
decrease display brightness.  

•  Dual Alpha Keypad and the Triple Tap Keypad -- Light Blue+Diamond 1+Up Arrow 

and Light Blue+Diamond 1+Down Arrow keys. 

Until the display brightness is satisfactory.