Lucent Technologies Definity Enterprise Communication Server 8.2 Benutzerhandbuch
DEFINITY ECS Release 8.2
Administrator’s Guide
Administrator’s Guide
555-233-506
Issue 1
April 2000
Managing multimedia calling
210
Multimedia Applications Server Interface
9
Step 5 — Administer a signaling group
For each MASI node, you need to establish a unique signaling group. Use the
command
command
add signaling-group xxx
to access the Signaling Group form.
Screen 1.
Signaling Group Form (Page 1 of 5)
For each link, establish a Non-Call Associated Temporary Signaling Connection
(NCA-TSC) with the following attributes:
(NCA-TSC) with the following attributes:
■
Associated Signaling
—
MASI requires Facility Associated Signaling, so
this field must be set to y.
■
Primary D-channel
—
Enter a 6- to 7-character port number associated
with the DS1 Interface circuit pack port. The port address of the PRI that
carries D-channel signaling.
carries D-channel signaling.
The port number is used to assign the primary D-channel in the Signaling
Group. For 24-channel facilities, the 24th port is assigned as the D-channel.
For 32-channel facilities, the 16th port is assigned as the D-channel.
Group. For 24-channel facilities, the 24th port is assigned as the D-channel.
For 32-channel facilities, the 16th port is assigned as the D-channel.
■
Max Number of
NCA
TSC
—
For MASI, this must be 1.
■
Max number of
CA
TSC
—
Leave the default of 0.
■
Trunk Group For
NCA
TSC
—
This can be left blank.
■
Trunk Group for Channel Selection
—
This can be left blank.
Page 1 of 5
SIGNALING GROUP
Group Number: _ Associated Signaling? y
SIGNALING GROUP
Group Number: _ Associated Signaling? y
Max number of NCA TSC: __
Primary D-Channel: ______ Max number of CA TSC: __
Trunk Group for NCA TSC: __
Trunk Group for Channel Selection: ___