LevelOne Bluetooth Headset BLH-1100 Benutzerhandbuch

6

Charge Battery

Turn On / Off

1. Plug the Charger into electric outlet. Connect the Headset and Charger as picture 

    shown below. The Red LED will light up.

2. When the battery is fully charged, the Red LED of Headset will switch off.

1. When power off, to turn on the Headset, press and hold S1 button for 3 seconds. 

    The Blue LED of Headset flashes. The user can hear a low tone of “Do” if wearing 

    Headset.

2. When power on, to turn off the Headset, press and hold S1 button for 3 

    seconds. The Red LED flashes quickly. Then, the Headset is powered 

    off. The user can hear a low tone of “Do” if wearing Headset.

●

 

The Headset is embedded with a 

rechargeable battery. For the first time 

usage, it takes about 4 hours to fully 

charge the battery, and 2 hours 

afterward. With Battery fully charged, 

the talk-time can be up to11 hours, and 

the stand-by time can be up to 200 

hours.

●

The Headset can’t be used while it’s 

in charging mode.

Pairing

1. The Headset must be powered off before initiating pairing. To initiate pairing, make 

    sure the Headset is in power off mode first, press and hold S1 button for 6 seconds 

    until the Blue and Red LEDs of Headset are flashing alternatively. If the user is 

    wearing the Headset during the pairing process, she/he will hear two short high 

    tones of “Do” when the Headset is ready for pairing.

2. Initial pairing process of your mobile phone.

3. You will be asked to enter pin-code to complete pairing,

    enter 1234 and confirm it. The Red LED of Headset will 

    turn off and the Blue LED will flash quickly after pairing

    completed successfully.

4. After pairing, the Blue LED of Headset will quickly flash. If with reference design in 

    your mobile phone, you can find a symbol of headset / handsfree function.

●

 

The 1234 is default pin-code pre-stored in Headset.

Note: 

●

 

If the Headset is not in pairing mode, your mobile phone won’t find the Headset. 

Please set the Headset in pairing mode before enabling your mobile phone to search 

for the headset.

●

 

If no pairing happened in a period of time, approximately three minutes, the 

Headset will automatically power on and the previous pairing, if any, is revoked. You 

may need to repeat steps 1 to 3 until pairing succeeds.

●

 

The Red LED of Headset 

will flash slowly while low 

battery.

3 seconds to turn on

3 seconds to turn off

6 seconds to enter pairing

Enter 1234

7