Levana Melody Digital Wireless Audio Baby Monitor LV-TW200 Benutzerhandbuch

1.  Plug one end of the included power adapter into any available wall outlet.
2.  Plug the small end of the power adapter into the DC jack on the back of the baby monitor.

1.  Use a small flat head screwdriver to unlock the battery cover on the 

back of the baby unit, taking care not to screw past the ‘open‘ point.

2.  Remove the cover and install 3 AA batteries.
3.  Replace the battery cover and lock the compartment. 

1.  Use a small flat head screwdriver to unlock the battery 

cover on the back of the baby unit, taking care not to 
screw past the ‘open‘ point.

2.  Remove the cover and install the battery pack in the 

compartment, ensure it fits into the corresponding 
recess points. Follow the polarity instructions on the 
diagram to the right.

3.  Replace the battery cover and lock the compartment
4.  Plug one end of the included power adapter into any available wall outlet.
5.  Plug the small end of the power adapter into the DC jack on the back of the recharging 

base, place the parent unit in the base to charge.

1.  Press the power button   on the parent unit, the LCD screen and the sound 

indication LED’s on the front of the unit will light up during start up.

2.  Press the power button   on the baby unit, the LCD screen and night light will light 

up during start up.

3.  The parent and baby units will automatically pair. If the units do not pair 

automatically, see Pairing the Devices on page 15.

4.  To power OFF the units, press and hold the power button   on the parent and baby 

units until the LCD screen goes blank.