Laplink MN-LGD011-XX-US Benutzerhandbuch

37

you connect to must be connected to an IPX or TCP/IP 
network. 

• The LapLink Gold security setup on the host computer 

must be configured to allow incoming connections. For 
more information, 

• LapLink must be running on both computers.
• TCP/IP or IPX ports must be enabled.

Setting up a Dial-Up Networking connection

Before using Dial-Up Networking, create a Dial-Up Net-
working connection to the network server by supplying the 
number to dial.
To create a Dial-Up Networking connection:
1 Click the Connect Over button on the LinkBar and then 

click Dial-Up Networking.

2 Click the New Connection button and follow the instructions 

on your screen. This launches Windows “Make A New Con-
nection wizard. Alternatively, LapLink Gold Corporate can 
use any existing dial-up connection available to Windows.

Connecting to a network computer using Dial-Up 

Networking

To use Dial-Up Networking to connect to a network 
computer:
1 Click the Connect Over button on the LinkBar and then 

click Dial-Up Networking.

2 In the list of connections, click the connection to your RAS 

server.

3 Ensure that this box is checked: After Dialing, Connect to a 

Computer on a Network.

4 Click the Dial button.
5 When prompted, type the user name and password 

required by the dial-up server. If your user name or pass-
word fail, contact your network administrator for assistance 
with logging on to the RAS server.

6 In the Connect Over LAN (Network) dialog box, click the 

name of the computer you want to connect to.
If the computer is not listed and you are attempting to 
connect over a TCP/IP network, click the TCP/IP 
Addresses tab. Then do either of the following:

•In the Connections list, click the name of the computer 

you want to connect to.

•Under TCP/IP Name or Address, type the IP address of 

the computer.

7 Under Services, verify that the services you want to use are 

checked.

8 Click OK.