Lanier 2001 Benutzerhandbuch

4 - 16

Facsimile Programming

This section gives instructions on how to program the number to be stored in the One-
Touch, Speed Dial and Group Dial Keys. In addition, it shows you how to set up special 
parameters for each One-Touch Key, including batch Time and Relay Broadcast.

You can program the most frequently dialed fax numbers into One-Touch Keys. This 
allows you to transmit documents simply by pressing a One-Touch Key and the START 
Key. You can program any of the One-Touch Keys as Group Dial Keys with up to 50 
locations in each.

1

Press the PROGRAM Key and scroll through the 
menus until you reach the DIAL REGISTRATION 
Menu. Press YES to begin programming.

2

Press YES since this is the first menu to appear and 
press YES to enter the One-Touch Program.

3

Press the One-Touch Key you wish to program.

4

Press YES to accept your selection.

5

Enter the Telephone number you wish to transmit 
to and press YES.

6

Enter the Name you wish associated with this 
number and press YES after checking to see it OK.

1

If you wish to change any entry, a screen allows you to accept or change.

2

If you wish to change a Key that was previously 
programmed, this message appears. Press YES to 
keep this location as is, or NO if you wish to edit it.

3

If you choose NO, use the arrow keys to select 
either EDIT or DELETE and then proceed with the 
needed changes.

DIAL REGISTRATION?         

  YES / or 1-5                

1 ONE-TOUCH DIAL?  

   OK=YES

-SELECT REGIST. KEY-

ONE-TOUCH  01

            or PRESS “YES”

       

    OK=YES

NAME=_       

    OK=YES

REGISTERED!    KEEP?

OK=YES (EDIT/DEL=NO)

EDIT               *DELETE

 -SELECT&PUSH”YES”-