LaCie 2 Benutzerhandbuch

LaCie Network Space 2 

• DESIGN BY NEIL POULTON

 

Administering Your LaCie Network Space 2

User Manual 

page 40

This page allows you to modify your Network Space 2’s network 
settings. Note that there are two tabs to the page, standard and 
advanced.

4.8.1.  Standard Settings

Configure using DHCP or manually:

 If your network is DHCP-en-

abled, as are most consumer networks, the Network Space 2 will 
automatically be assigned an IP address and other values.  As a 
result, most users will see that the table has been filled in with val-
ues.  If you select 

Configure Manually

, you will be able to modify 

the table values.

Automatic port forward: 

If you want your Network Space 2 to be ac-

cessible via the internet for remote access, you need certain ports to 
be open in your router to allow proper communication. Check this 
box to enable port forwarding, which uses UPnP-IGD/NAT-PMP to 
automate port forwarding (if your router is compatible).

The following ports need to be forwarded to ensure proper commu-
nication: 21 (FTP) and 80 (HTTP).

 If you activate automatic port forward, public 

shares will become accessible (read/write) through FTP.

Dynamic IP Resolution:

 You can use a third party Dynamic DNS ser-

vice to create an easy-to-remember URL for accessing your Network 
Space 2 remotely (

). This service is free and no subscription 

is required. 

For access to a step-by-step screencast click the “

i

” next to the Re-

 

Fig. 59 

Fig. 60 

Fig. 61