LaCie 2 Benutzerhandbuch

LaCie Network Space 2 

• DESIGN BY NEIL POULTON

 

Troubleshooting

User Manual 

page 56

Problem

Question

Solution

The USB drive/key or USB 
printer connected to the USB  
expansion port is not recog-
nized.

Is the Network Space 2 connected to 
your computer via USB?

Devices connected to the USB expansion port (hard drive or 
printer) are automatically unmounted when you connect the 
Network Space 2 to a computer via USB.  To make the external 
hard drive or printer accessible, disconnect the Network Space 
2 from your computer and connect it to the network using the 
Ethernet cable.

I connected a USB drive to 
the USB expansion port, but 
the drive does not mount and 
is not listed in LaCie Network 
Assistant.

Is the USB drive formatted in MS-DOS 
(FAT32) and is its capacity more than 
500 GB?

Reformat the drive in a different file format.

The Network Space 2 is not 
recognized by the computer.

Does your computer’s configuration 
meet the minimum system require-
ments?

Check section 

 for more in-

formation.

Is the system’s power supply connected 
and is the LED on the front of the drive 
on?

Make sure that the power supply is properly connected (see sec-
tion 

the system has been powered on pushing the power button; and 
that the outlet the power supply is connected to is powered on 
or has a sufficient supply of power.

Is the LED on the front of the device 
flickering for an inordinate period of 
time?

If the LED is flickering or will not turn on, the power supply 
may be defective.  Please contact your LaCie reseller or LaCie 
Customer Support.

Did you follow the correct installation 
steps?

).

Are both ends of the Ethernet cable 
firmly connected?

Disconnect the Ethernet cable, wait 10 seconds and then 
reconnect.

Ensure that the interface connectors are properly aligned.  The 
Ethernet cable can only be inserted one way. Make sure it is 
correctly oriented.

Check that the Ethernet connectors are straight and fully seated 
in the Ethernet ports.

Make sure that you use the Ethernet cord provided in the LaCie 
Network Space 2 box.

continued on the next page >>