Infocus PN-L702B Benutzerhandbuch

Page 17

INF7020 Hardware Guide

The computer module, sound bar and monitor function independently. Each component must be controlled separately.

TO TURN THE INF7020 ON 
1) 

Press the computer module POWER button located on the back of the monitor. 

2) 

Press the POWER button located on the front of the monitor (or use the monitor's remote). 

3) 

If installed, press the sound bar POWER button on. The computer module, monitor and sound bar turn on. 

If the power is not turning on, check the power switch on the back of the monitor and verify that all power cords and power 

supplies are properly connected and connected to AC.  

TO PUT THE INF7020 MONITOR INTO STANDBY
1) 

Press the POWER button on the front of the INF7020 (or use the monitor's remote). 

2) 

If you want to put the computer module into standby mode, press the POWER button located on the back of the monitor.

TO COMPLETELY POWER DOWN THE INF7020 
1) 

Press the POWER button on the front of the INF7020 (or use the monitor's remote). 

2) 

Press the computer module POWER button located on the back of the monitor. 

3) 

Turn off the power switch on the back of the monitor and unplug the power cord from the power outlet. 

 When toggling the power switch or the POWER button off and on, wait at least 5 seconds.