Infocus PN-L702B Benutzerhandbuch

Page 22

1 9 2 0 x 1 0 8 0

V: 60 Hz    H: 67.5 kHz

DATE/TIME SETTING: Set the date and time. Press the left and right arrow buttons to select the date and time parameters and then 
press the up and down arrow buttons to change the values. Set the date in the following order: month, day and year. Set the time on 
a 12-hour basis (factory default).
DATE/TIME FORMAT: Sets the date and time display format. 

Date options include: MM/DD/YYY, DD/MM/YYYY, and YYYY/MM/DD. 
Time options include: 12 and 24-hour time.

SCHEDULE: Turns the power on and off, and changes the screen brightness at specified times.

-

:

– –

– –

– –

– –

– –

– –

–

– – – –

SCHEDULE

No.

POWER DAY OF THE WEEK

TIME

INPUT

BRIGHT

– –/– –/– – – –      – – –            – –:– –:– –    – –

(1)

–

-

:

– –

– –

– –

– –

– –

– –

–

– – – –

–

-

:

– –

– –

– –

– –

– –

– –

–

– – – –

–

-

:

– –

– –

– –

– –

– –

– –

–

– – – –

–

-

:

– –

– –

– –

– –

– –

– –

–

– – – –

–

-

:

– –

– –

– –

– –

– –

– –

–

– – – –

–

-

:

– –

– –

– –

– –

– –

– –

–

– – – –

–

-

:

– –

– –

– –

– –

– –

– –

–

– – – –

–

(5)

(2)

(3)

(4)

(6)

1 9 2 0 x 1 0 8 0

V: 60 Hz    H: 67.5 kHz

(1) - "●" means the schedule if active. "○" means the schedule is not active.
(2) POWER - ON turns the monitor on at the specified time. OFF turns the monitor off at the specified time.
(3) DAY OF THE WEEK - Specifies the day of the week to execute the SCHEDULE. Options include: 0: ONLY ONCE; 1: EVERY 

WEEK, and 2: EVERY DAY.
(4) TIME - Specifies the time to execute the SCHEDULE.
(5) INPUT - Specifies the default source input at power up. When INPUT is not specified, the monitor defaults to the last used 

source input.
(6) BRIGHT - Sets the brightness when changing the screen brightness at a specified time.

• Do not switch off the main power after setting the SCHEDULE.
• Specify the correct date and time. SCHEDULE does not function unless the date and time are specified.
• Check regularly that the set date and time are correct.
• When STANDBY MODE is LOW POWER, SCHEDULE cannot be set.
• When a temperature abnormality occurs and the backlight brightness is reduced, the brightness is not changed even
if a schedule set to BRIGHT is executed.