IBM P275 Benutzerhandbuch

13

x

x

x

x EXPERT mode

You can make additional adjustments to the color in greater detail 
by selecting the EXPERT mode.

The menu appears on the screen.

m/M buttons to highlight 

m/M buttons to select the R (red), G 

</, buttons to adjust the input signal 

for both GAIN (6) and BIAS (

If you want to reset the EXPERT adjustments, select 
0 (RESET) in COLOR menu. Then select OK in the RESET 
window.

x

x

x

x sRGB mode

The sRGB color setting is an industry standard color space 
protocol designed to correlate the displayed and printed colors of 
sRGB compliant computer products. To adjust the colors to the 
sRGB profile, simply select the sRGB mode in the COLOR 

MODE (

) menu of the OPTION (

) menu. 

However, in order to display the sRGB colors correctly (

γ = 2.2, 

6500K), you must set your computer to the sRGB profile. If you 
select this mode, you cannot operate the CONTRAST/BRIGHT 
menu adjustments.

Note
Your computer and other connected products (such as a printer), must be 
sRGB compliant.

The colors of most display monitors tend to gradually change 
brilliance over several years of service. The COLOR RETURN 
feature found in the PRESET, VARIABLE, and sRGB menus 
allows you to restore the color to the original factory quality 
levels. The explanation below explains how to restore the 
monitor’s color from the PRESET mode for example.

First, select the PRESET, VARIABLE, or sRGB mode in the 
OPTION menu (page 12).

The menu appears on the screen.

m/M buttons to highlight 

The COLOR menu appears on the screen.

m/M buttons to highlight 

m/M buttons to select OK.

The picture disappears while the color is being restored (for a 
few seconds). After the color is restored, the picture reappears 
on the screen.

Notes
• Before using this feature, the monitor must be in normal operation 

mode (green power indicator on) for at least 30 minutes. If the monitor 
goes into power saving mode, you must return the monitor to normal 
operation mode and wait for 30 minutes for the monitor to be ready. 
You may need to adjust your computer’s power saving settings to keep 
the monitor in normal operation mode for the full 30 minutes. If the 
monitor is not ready, the following message will appear.

• The monitor may gradually lose its ability to perform this function due 

to the natural aging of the picture tube.

45

COLOR

R
G
B
R
G
B

1 6 0 0 x 1 2 0 0   /     8 5 H z

: EXPERT

COLOR

s

:

/

RGB

1 6 0 0 x 1 2 0 0   /     8 5 H z

: sRGB

COLOR
RETURN

OK

CANCEL

COLOR

: PRESET

1 6 0 0 x 1 2 0 0   /     8 5 H z

COLOR
RETURN

COLOR

: PRESET

1 6 0 0 x 1 2 0 0   /     8 5 H z

AVA
A F T E R
WARM UP

LABLE

I