IBM Partner Pavilion Vitrual Switch Extension BMD00082 Benutzerhandbuch

50  

„

  Chapter 4: Stacking

BMD00082, February 2009

Once stacking is enabled on each switch, connect the stack trunk, and define the Master switch 
interface, use the BBI to access the Master switch using the internal management IP interface 
of the Master switch, and complete the configuration.

Locating the Master Switch Internal Management IP Interface

To launch the BBI for the Master switch, use a Web browser to access the Master interface IP 
address configured in 

 of the previous procedure.

Alternately, the Advanced Management Module can be used. To locate the IP address of the 
Master switch, go to the System Status Summary > I/O Modules, and use the address of the 
switch identified as the master in the Stacking column.

To launch the BBI from within the Advanced Management Module, go to I/O Module 
Tasks > Configuration, select the target switch and click Advanced Configuration. In the 
Advanced Configuration window, under Start Telnet/Web Session, click on the Start Web 
Session button.

Viewing Stack Connections

From the Master switch BBI menu, choose Information > Stack and locate the Attached 
Switch Information. Make sure all of the stack switches are listed. If a switch is not listed, 
check the cables on the stack links, and make sure all stacking requirements are met, as listed 
in 

Attached Switch Information Window