Huawei VP9050 Benutzerhandbuch

Seite von 124
HUAWEI VP9050 Executive Video Terminal 
User Guide 
 
Issue 03 (2011-12-10) 
Huawei Proprietary and Confidential 
Copyright © Huawei Technologies Co., Ltd 
46 
 
Figure 6-1 Procedure for joining an authentication conference 
 
 
 
Setting the number of anonymous sites: Set the number of anonymous sites when 
initiating a conference. Set numbers of anonymous sites of all types as listed in Table 6-1, 
for example, Anonymous H.323 sites
 
Setting the authentication password: Set the Conference control password when 
initiating a conference. This password can serve as the authentication password, which 
an anonymous site needs to enter to join an authentication conference. If the Conference 
control password is left blank, anonymous sites can join the conference without 
entering any password. 
 
Obtaining the access number of the authentication conference: After the authentication 
conference is initiated, a terminal can obtain the access number from the message which 
is displayed when the terminal requests chair control rights successfully; the chair site 
can also obtain the access number by choosing Diagnostics > Status > Conference
Anonymous sites can obtain the access number and the authentication password from the 
chair site using other methods. 
 
Joining the authentication conference by anonymous sites: Anonymous PSTN sites can 
join the conference by calling the access number of the audio authentication conference 
and anonymous IP sites can join the conference by calling the access number of the 
video authentication conference. 
To join an authentication conference, do the following: 
Step 1  Check the necessary resource preparations using the following methods: 
 
From the chair site: Check that the anonymous site resources are available in the 
conference to be called, and the access number of the video or audio authentication 
conference and the authentication password have been obtained. 
 
From the local site: Check that the site has been registered with the GK. 
Step 2  Press 
  on the remote control to display the Call screen.