HP Performance Optimized Data Center (POD) 40cp Servicehandbuch
![HP](https://files.manualsbrain.com/attachments/29005dca542c93ad59e01e223583dbd51961550d/common/fit/150/50/3931a36faa9f1af0627fe52b73d277ccf98e5d18c55433f253353db13ee5/brand_logo.jpeg)
Removal and replacement procedures 19
4.
Slide the hardware bracket to the right along the busway, completely disconnecting it from the busway
drop box (2).
drop box (2).
WARNING:
Use caution when removing and replacing the busway drop box. The drop box
weighs approximately 9 kg (20 lb).
5.
Rotate the busway drop box 90° so that it is perpendicular to the electrical busway, and then remove
the drop box from the electrical busway (3).
the drop box from the electrical busway (3).
Replacing the busway drop box
WARNING:
Use caution when removing and replacing the busway drop box. The drop box
weighs approximately 9 kg (20 lb).
1.
Place the silver drop box bracket on the electrical busway where you want to replace the busway drop
box (1).
box (1).
2.
Note the required rotation indicated on the drop box, insert the drop box into the drop box bracket on
the electrical busway, and then rotate the drop box 90° until it locks into place (2).
the electrical busway, and then rotate the drop box 90° until it locks into place (2).
CAUTION:
To prevent damage to the drop box and make sure that the drop box engages
properly, be sure that the drop box is completely flush to the busway. If a drop box is damaged
during installation, do not attempt to re-engage or repair the drop box.
during installation, do not attempt to re-engage or repair the drop box.
3.
Slide the hardware bracket to the left along the busway until it connects to the drop box (3).