HP STORAGEWORKS SSL1016 Benutzerhandbuch
Installation and Configuration
24
The following cables are shipped with your autoloader:
■
68-pin VHDCI connector to 68-pin VHDCI connector 3 foot (.092 meter)
cable
cable
■
68-pin VHDCI connector to 68-pin VHDCI connector 6 foot (1.83 meter)
cable
cable
■
68-pin VHDCI connector to 68-pin HD connector 6 foot (1.83 meter) cable
SCSI Cable and Terminator Requirements
If the autoloader is the last device on the SCSI bus you must attach a terminator to
the SCSI connector on the back panel of the autoloader. There must be a
terminator on each end of the SCSI bus. Typically, the host adapter provides the
front-end termination.
the SCSI connector on the back panel of the autoloader. There must be a
terminator on each end of the SCSI bus. Typically, the host adapter provides the
front-end termination.
SCSI Cable Length
LVD SCSI configurations have a maximum allowable bus length of 39.4 feet
(12 meters). To determine the cable length of the bus, measure the lengths of the
SCSI cables connecting each device to that bus and add those lengths together for
the total length. To that total length, add 16 inches (40.64 cm) for the internal
SCSI cable length used in the autoloader.
(12 meters). To determine the cable length of the bus, measure the lengths of the
SCSI cables connecting each device to that bus and add those lengths together for
the total length. To that total length, add 16 inches (40.64 cm) for the internal
SCSI cable length used in the autoloader.
Accessories
The following accessories are shipped with each autoloader:
■
Installation poster
■
SCSI cable(s)
■
RJ-45 Ethernet cable, 10 foot (3.048 meter)
■
SCSI terminator
■
Hardware brackets and handles to rackmount the autoloader
■
Standalone configuration hardware
■
Two magazines
■
1 data cartridge
■
Power cord
■
Rackmount template