Horstmann C-Stat ZW Betriebsanweisung
TPI cycles per hour
This setting helps the TPI energy saving
software to operate correctly depending on
the type of heating system you have
the type of heating system you have
Optimum start
This calculates the amount of time the C-
Stat may need to switch on in advance of
the next target temperature setting in order
to meet the requirement.
the next target temperature setting in order
to meet the requirement.
Tamper setting
This setting allows a 4 digit release code to
be set up to stop unauthorised adjustments
being made in multi occupancy buildings.
being made in multi occupancy buildings.
Set up Z-Wave
Wireless connection to receiver
MENU OPTIONS
(Contd...)
Setting the SELECT CLOCK FORMAT
Pressing BACK at any time in the process will return you to
normal operating mode
normal operating mode
Press ENTER twice
Press ENTER
Press '-' or '+' until
Select clock format
appears on the
display
Select clock format
appears on the
display
Press '-' or '+' until
Set Up appears on
the display
Set Up appears on
the display
Press ENTER
Either 'Select clock
24 hr' or 'Select
clock AM/PM' will
appear
24 hr' or 'Select
clock AM/PM' will
appear
Press '-' or '+' to
toggle between
the two options
toggle between
the two options
Select your choice
by pressing ENTER
by pressing ENTER
The unit will now
return to the Set up
position, simply
press BACK to
return to normal
operating mode
return to the Set up
position, simply
press BACK to
return to normal
operating mode
16