Hitachi US7070447-001 Benutzerhandbuch
HiSpeed Switch Troubleshooting Guide
8-4
US7070447-001, Rev 01
Draft Level—Hitachi Confidential
VLAN Tips
For each VLAN created with an IP address, an associated entry is also generated.
Therefore, it is critical to verify that these entries exist. If any of the entries are
missing, the system configuration may be corrupted. It is recommended to delete
and re-create the VLAN.. Table 8-1 lists the VLAN entries and Table 8-2 lists
useful CLI commands.
Therefore, it is critical to verify that these entries exist. If any of the entries are
missing, the system configuration may be corrupted. It is recommended to delete
and re-create the VLAN.. Table 8-1 lists the VLAN entries and Table 8-2 lists
useful CLI commands.
Table 8-1.
VLAN Entries
Description:
CLI command:
VLAN entry created:
Virtual Port Information
table
table
/VLAN/SHOW >vport
Router Virtual Port id ‘33’
Bridge Forwarding
(ARL) table
(ARL) table
/VBRIDGE/SHOW >fwt
MAC entry with Port id ‘33’
Routing table
/INET/SHOW >route
Route entry with a directly
connected VLAN Interface type
connected VLAN Interface type
Table 8-2.
Useful CLI Commands
/VLAN/SHOW >vlan
Displays the VLAN information.
/
VLAN/SHOW >vstats
Displays all Virtual Port statistics.
/VLAN/SHOW >vport
Displays all Virtual Port information.
/VLAN/SHOW >vrouter
Displays all Virtual Router information.
/VLAN/CONFIG
The following subcommands are available for VLAN
configuration:
•
configuration:
•
ADDPORT
•
CREATE
•
DELPORT
•
DIABLE
•
ENABLE
•
MODIFY
•
MOVPORT
•
REMOVE