Hitachi DZ-MV780A Benutzerhandbuch

English

123

Playing Back

Press the A button in the recording pause 
status.

The DVD video camera/recorder will enter 
the playback mode, and the scene you have 
recorded last will be played back. (For 
“scene”, see p. 103 and “Terminology”, 
p. 155.)
When playback is finished, the DVD video 
camera/recorder will enter the pause status 
at the last image on disc.
If the playback pause status continues for as 
long as 5 minutes, the DVD video camera/
recorder will automatically return to the 
recording pause status.

Press the C button.

Playback will stop, and recording pause 
status will be restored.

• If the LCD monitor is open during playback of movie, 

playback sound will be heard from the speaker. Adjust 
the sound volume using the volume control buttons 
(

S

, 

R

).

• To temporarily stop playback, press the 

A

 button. 

Press the 

A

 button again to restart playback.

• Even if you stop playback midway and immediately 

start recording again, the new image will be recorded 
after the last scene on disc or card (the previous 
images will not be overwritten).

• Image data edited on PC, etc., or the recorded image 

may not appear on this DVD video camera/recorder; 
also, the recorded sound may not play back, 
depending on the type of image data.

• Image data recorded on another DVD video camera/

recorder or DVD recorder may not be played on this 
DVD video camera/recorder.

• Depending on the amount of data to be played back, 

it may take some time for the playback image to 
appear.

• Do not operate the power switch or remove the card 

while the ACCESS/PC or CARD ACCESS indicator is 
lit or blinking: Doing so may damage the card or the 
data on card.

Before You Begin

• Insert a disc or card recorded on this DVD video camera/recorder (p. 49, 

51).

• Turn the DVD video camera/recorder on (p. 44).

STOP/EXIT

Use 

f

 / 

e

 / 

d

 / 

c

 to select, 

and then press 

A

 to designate.