Harman Stove Company Coal Stoker DVC-500 Benutzerhandbuch
This appliance is also approved
for installation into a shop.
4” Pellet Vent
Harman Venting
Components Only
5.5” X 7.5” adhesive backed metal label.
LISTED SOLID FUEL BURNING ROOM
HEATER - MODEL: “DVC 500”
BARCODE LABEL
008
Serial No.
N
o
de série:
TESTED TO: ASTM E1509, and parts of UL127
TEST DATE: July, 1996
APPROVED FOR USE IN MANUFACTURED HOMES.
PREVENT HOUSE FIRES: KeeP all dOOrs and HOPPer lid ClOsed during OPeratiOn.
install and use Only in aCCOrdanCe witH manufaCture’s installatiOn and
OPerating instruCtiOns.COntaCtO lOCal building Or fire OffiCials abOut
restriCtiOns & installatiOninsPeCtiOn requirements in yOur area. see tHe
installatiOn manual and CHeCK witH yOur lOCal COdes fOr sPeCial instruCtiOns
wHen Pasing tHe Vent tHrOugH a COmbustible wall Or Ceiling.
unit must be PlaCed On a nOn-COmbustible flOOr Or flOOr PrOteCtOr extending
unit must be PlaCed On a nOn-COmbustible flOOr Or flOOr PrOteCtOr extending
16” tO tHe frOnt , 8” tO tHe sides and 3” tO tHe rear. minimum 24 gauge sHeet metal.
DIREcT-VENT - use Only Harman dVC-Venting COmPOnents frOm tHe aPPlianCeg
DIREcT-VENT - use Only Harman dVC-Venting COmPOnents frOm tHe aPPlianCeg
tHrOugHt tHe Outside wall. use Only 4” tyPe l Or Pl Pellet Vent On tHe Outside Of
tHe HOme.
DO NOT cONNEcT TO A cHIMNEY. DO NOT cONNEcT THIS UNIT TO A cHIMNEY OR FLUE
DO NOT cONNEcT TO A cHIMNEY. DO NOT cONNEcT THIS UNIT TO A cHIMNEY OR FLUE
SERVING ANOTHER APPLIANcE.
FUEL: antHraCite riCe COal Only. tHe ePa PrOHibits tHe use Of any OtHer fuel,
FUEL: antHraCite riCe COal Only. tHe ePa PrOHibits tHe use Of any OtHer fuel,
exCePt fOr COal ignitiOn.
INPUT RATING: 6 lbs/Hr
ELEcTRIcAL RATING: 2.5 amPs, 120 VOlts, 60 Hz
rePlaCe glass witH 5mm CeramiC Only
INSPEcT AND cLEAN VENTING ExHAUST VENTING
INPUT RATING: 6 lbs/Hr
ELEcTRIcAL RATING: 2.5 amPs, 120 VOlts, 60 Hz
rePlaCe glass witH 5mm CeramiC Only
INSPEcT AND cLEAN VENTING ExHAUST VENTING
SYSTEM REqUENTLY.
MINIMUM cLEARANcES TO cOMbUSTIbLES:
unit to side wall
unit to side wall
18”/457mm
unit to rear wall
3”/76mm
stove top to Ceiling 24”/610mm
Corner installation
Corner installation
9”/229mm
FLOOR PROTEcTION:
front
front
16”/406mm
sides
8”/203mm
rear
3”/76mm
Date of Manufacture:
Manufactured by: Harman Home Heating - 352 Mountain House Road, Halifax PA 17032
2012 2013 2014 JAN FEb MAR APR MAY JUN JUL AUG SEP OcT NOV DEc
#3-90-08210
Please copy your serial number
from the label on your stove to the
box below.
SErIAl NumbEr
SA
mP
lE
lA
bE
l