Guardian Technologies Guardian Technologies, LLC Vacuum Cleaner GGU350TT Benutzerhandbuch

plEaSE rEad all inSTrucTionS bEForE uSinG ThiS appliancE

E-4

WARNING! Do not use the Dirt Cup Handle to move the cleaner.

THERMAL RESET BUTToN:

Operates due to overheating, caused by a full dirt cup, clogged filter or blocked pipes.

Unplug the cleaner and remove the blocked materials. To operate again, after

cooling down the cleaner about 30 minutes, press the Thermal Reset Button.

Model .................................................. GGU350TT

Rating .................................................. 120V/60Hz

Amperage ............................................... 12 amps

Weight (Net) .......................................... 20.50 lbs

Dimensions ............................. 15" x 14" x 45.25"

Cord Length .............................................. 32 feet

Inner Filter .......................................... HEPA Filter

Exhaust Filter .................................. Micron Filter

Headlight ......................................................... Yes

Belt .................................................................... Yes

Height
Setting
Control

O W

E R

B R

Main Power

Switch

Brush Power

Switch

Handle

Extension

Button

Handle Inlet

Hose Connector

Canister

Handle

Body

Dirt Cup

Dirt Cup Handle

Filter

Height Adjustment

Knob

Canister

Release Pedal

Headlight

Base

Thermal Reset

Button

Cord

Plug

Handle Release

Pedal

Base Hose

Connector

(UPRIGHT MODE)

Handle Removal

Button

Hose Clip

Hose

Hose Cradle

Handle Hose Connector

(TOOLS/CANISTER MODE)

Cord Clip

Cord

Storage

Hooks

HoSE CRADLE ASSEMBLy

Set hose cradle on the top of the cleaner. (Fig. 1)

•

using a phillips screwdriver, secure the 3/4-inch screw.

•

HoSE ASSEMBLy

insert the body end of the hose into the hose inlet on the top of the cleaner. (Fig. 2)

•

line up circular tab on hose cuff with inner groove. (Fig. 2)

•

connect and twist clockwise to secure proper hose connection. (Fig.3)

•

place hose in hose cradle. (Fig. 4)

•

insert the base end of the hose into the hose inlet on the base of the cleaner. (Fig. 5)

•

IMPoRTANT: hose must be connected to inlet on base of vacuum to work in the upriGhT

mode.

E-5

Fig. 1

Fig. 2

Fig. 3

Fig. 4

Fig. 5

VACUUM ASSEMBLy: UPRIGHT USE

HoSE ASSEMBLy

Hose

Base Hose

Connector

Detail of

Hose Lock