GE Capital 24959 Benutzerhandbuch

11

You can set all modes to “punch-through” to any 
mode for Volume/Mute control without needing to 
change to that mode by doing the following.

1.  Press and hold SETUP until the indicator 

remains on, then release SETUP.

2.  Press and hold MUTE until the indicator blinks 

off, then release the button.

3.  Press and release SELECT to select the 

desired mode (TV, DVD, etc.) for Volume/Mute 
control; the indicator blinks, then stays on.

4.  Press and release MUTE; the indicator turns 

off. Note: The indicator will blink rapidly for 3 
seconds if the mode you have selected does 
not have Volume/Mute control. 

5.  All other modes will now “punch-through” to 

your chosen mode for Volume/Mute control.

You can set any mode to use only its own Volume/

Mute control. 

Note: If your chosen mode does not have Volume/

Mute functions, then this remote’s VOLUME and 
MUTE will not operate.

1.  Press and hold SETUP until the indicator 

remains on, then release SETUP.

2.  Press and hold MUTE until the indicator blinks 

off, then release the button.

3.  Press and release SELECT to select the 

desired mode (TV, DVD, etc.); the indicator 
blinks, then stays on.

4.  Press and release VOLUME- (down); the 

indicator blinks, then stays on.

5.  Press and release MUTE; the indicator turns 

off. 

6.  All modes will now “punch-through” to the 

respective modes you have chosen for Volume/
Mute control.