GE Capital 24959 Benutzerhandbuch

15

1.  Press and hold the SETUP button until the red 

indicator turns on, then release the button.

2.  Press and release the desired mode button 

(TV, DVD, etc.), the red indicator blinks then 
stays on.

3.  Press and release the LEARN button, the red 

indicator blinks then stays on. 

4.  Press and release the Learning Remote button 

that you want to teach (e.g. POWER).

5.  Point both remotes facing each other by ap-

proximately 1 inch apart (see tips on page 12).

6.  Press and hold the Original Remote button 

(e.g. Power) until the red indicator blinks once 
and stays on. If there is a learning problem, the 
indicator blinks for three seconds and stays on. 
If this happens, repeat Steps 4 to 6.

7.  Repeat Steps 4-6 for other buttons you want to 

learn.

8.  Press and release the SETUP button when all 

desired remote commands are learned. Code 
Learning is now complete.

2.

4.

3.

6.

1.