Manualsbrain.com
  1. Handbücher
  2. Marken
  3. Gateway
  4. Printer 9250C
  5. Benutzerhandbuch

Gateway Printer 9250C Benutzerhandbuch

Download
Seite von 108
Menu item
Sub-menu item
Sub-menu item
Values and Description
 
 
DHCP Release
This menu appears if 
Config Method
 was set to
DHCP
 and a DHCP lease for the print server exists.
No
 (default): The current DHCP lease is saved.
Yes
: The current DHCP lease and the leased IP
address are released.
 
 
DHCP Renew
This menu appears if 
Config Method
 was set to
DHCP
 and a DHCP lease for the print server exists.
No
 (default): The print server does not request to renew
the DHCP lease.
Yes
: The print server requests to renew the current
DHCP lease.
 
 
Manual Settings
(Available only if 
Config Method
 is set to 
Manual
)
Configure parameters directly from the device control
panel:
IP Address
: The unique IP address of the device
(n.n.n.n), where n is a value from 0 to 255.
Subnet Mask
: The subnet mask for the device
(m.m.m.m), where m is a value from 0 to 255.
Syslog Server
: The IP address of the syslog server
used to receive and log syslog messages.
Default Gateway
: The IP address of the gateway or
router used for communications with other networks.
Idle Timeout
: The time period, in seconds, after which
an idle TCP print data connection is closed (default is
270 seconds, 0 disables the timeout).
 
 
Default IP
Specify the IP address to default to when the print
server is unable to obtain an IP address from the
network during a forced TCP/IP reconfiguration (for
example, when manually configured to use BootP or
DHCP).
Auto IP
: A link-local IP address 169.254.x.x is set.
Legacy
: The address 192.0.0.192 is set, consistent
with older HP Jetdirect devices.
 
 
Primary DNS
Specify the IP address (n.n.n.n) of a Primary DNS
Server.
 
 
Secondary DNS
Specify the IP address (n.n.n.n) of a Secondary
Domain Name System (DNS) Server.
 
IPV6 Settings
Enable
Use this item to enable or disable IPv6 operation on the
print server.
Off
 (default): IPv6 is disabled.
On
: IPv6 is enabled.
 
 
Address
Use this item to manually configure an IPv6 address.
Table 2-3
  Jetdirect sub-menus (continued)
22
Chapter 2   Control panel
ENWW