Gaggenau BX 480/481 610 Benutzerhandbuch

Seite von 44
33
Preparing self-clean (pyrolysis)
9
CAUTION
Fire risk! Loose food remainders, fat and roast 
juice can catch fire. Wipe out the oven interior 
with a moist cloth.
Remove coarse soiling and food remainders from 
the oven.
Clean the door seals manually, the inside of the 
door and the glass pane because the self-clean 
(pyrolysis) does not clean these parts.
Remove all loose interior parts from the oven 
interior. The slide-in racks are pyrolysis-proof. 
There must be no objects left in the interior.
Close the oven door.
Starting self-clean (pyrolysis)
1
Set the program selector to 
S
.
2
The 
œ
 symbol is displayed. Confirm with 
.
3
The turn-off time for when the self-clean 
(pyrolysis) will be completed is displayed. If 
preferred, the turn-off time can be changed with 
the rotary selector. Confirm with 
.
4
Remove all accessories and coarse soiling from 
the oven interior. Confirm with 
.
5
Start with 
I
. The cleaning time counts down on 
the screen. If the turn-off time was changed, the 
time until the self-clean (pyrolysis) starts counts 
down on the screen. The oven light remains off.
After 3 hours, a signal sounds. A message will appear 
on the screen. Once the appliance is cool, wipe out 
the remaining ash from the oven with a damp cloth.
Note: The oven door is locked for your safety. After 
cooling down, the door is unlocked as soon as the 
temperature has dropped below 390 °F (200 °C).
Set self-clean (pyrolysis) 
for both ovens
You can set the self-clean (pyrolysis) so that both 
ovens are cleaned successively. 
Between cleaning the first and second oven, the 
appliance will cool down for approx. 1 hour. Self-clean 
(pyrolysis) for both ovens takes approx. 8 hours. 
To set self-clean (pyrolysis) for both ovens, turn both 
rotary selectors to 
S
. Then set following the 
instructions in 
Start pyrolysis
.
Cleaning accessories with self-clean 
(pyrolysis)
Gaggenau baking trays and grill trays are coated with 
pyrolysis-proof enamel. To arrive at an optimum 
cleaning result, you are nevertheless advised to 
remove all accessories from the oven before the self-
clean (pyrolysis). Only this will ensure optimum heat 
distribution.
If you would like to remove burnt-in residues from your 
baking tray or your grill tray with self-clean (pyrolysis), 
it is imperative that you observe the following notes:
Notes
Remove extreme soiling, roast juice and food 
remainders before self-clean (pyrolysis). Food 
remainders, grease or roast juice can catch fire 
during self-clean (pyrolysis).
Only insert one baking tray or one grill tray in the 
lowest shelf in the oven.
Insert the baking tray or the grill tray fully.
Do not clean the wire rack, rotisserie spit, cast 
roaster, baking stone, core temperature probe or 
other accessories with self-clean (pyrolysis).
3\URO\VLV
_

)