Epson MediaLink Controller MLC 104 IP Plus Benutzerhandbuch

To set a display disconnected e-mail alert, do the following:
1

. 

Click the Monitor tab in the Global Configurator window. 

. 

Click the Add Monitor button below the Monitored 

window.  The Monitored Conditions Wizard 

window appears.

. 

Enter a name (Disconnected) in the Enter Monitored 

 field area.  The label now appears in the 

left pane. 

. 

Click Next to specify a condition.

. 

Select the desired equipment (for our purposes, choose the 

) from the Subject Port window 

and Connection Status: Disconnected from Available 

.

. 

Click Apply Condition, then click Next. 

. 

Click Next again to add an e-mail notification.

. 

Highlight the appropriate e-mail message (Disconnect 

) and contacts (e-mail recipient(s)), and click 

.

. 

Click Done.  The dialog box closes.

The Global Configurator project file contains all the 

configuration data (port assignments, product/device locations, 

scheduling data, etc.) you have created in Global Configurator.  

This is the data used to build the project's GlobalViewer Web 

pages for the MLC 104 IP Plus.  

To build a configuration, do the following:
1

. 

Click the GlobalViewer tab at the left window to open 

. 

Confirm that all configured products have been given a 

location.  If not, drag each product to the desired location 

or create new ones.

 

Save your project file.  If a project file has not been 

saved, GC prompts you to do so before building the 

configuration.

. 

From the Build menu, choose Build All Configurations or 
Build Changed Configurations

.

 

An activity bar appears, indicating that the build is 

progressing.  The Upload Manager dialog appears when 

the build is complete.  

The process of uploading your project is essential to successfully 

configuring the MLC 104 IP Plus and creating a GlobalViewer 

Web page.  You can upload the project to one MLC at a time or 

several at once. 

N

The Upload Manager appears only after a build has been 

successfully performed on at least one device.  If errors occur 

during the build of any devices, a dialog box appears listing the 

errors.