Epson PowerLite 713c Benutzerhandbuch

6. Do one of the following:

■

If you’re using a computer, turn it on or restart it. In a few 
moments, you should see your computer display projected. 

(Windows

®

 only: If you see a message saying that it has found 

a plug-and-play monitor, click 

Cancel

.) 

■

If you’re projecting a video, press the 

Source

 button on top 

of the projector to switch to your video source, and press the 

Play

 button on your DVD player or other device.

If a projected image fails to appear, see the next section for help. 

Once you see your image, turn to page 22 for instructions on focusing 
and making other image adjustments. 

When you’re done with your presentation, shut down the projector as 
described on page 25. Shutting down the projector correctly prevents 
premature lamp failure and possible damage from overheating. 

If you see a blank screen or a blue screen with the message 

No Signal 

after turning on your computer or video source, try the following:

■

Make sure the cables are connected correctly, as described on 
page 12 (for laptops) or in Appendix A (for other systems).

■

Make sure the power light is green and not flashing and the lens 
cover is off. 

■

Try restarting your computer.

■

Press the 

Source

 button on top of the projector to select the 

correct source. (Allow a few seconds for the projector to sync up 
after pressing the button.)